What is “Depth of field”?
Simply put, Depth of Field refers to the area in front of your camera that is in focus.
If your camera is set to focus one metre from the lens, Depth of Field refers to the area in front of, and behind one metre from the camera where subjects are still sharp enough to be considered in focus.
Along with Exposure and Composition, Depth of Field is one of the most important aspects of photography.
How do you control it?
Less is more
The main way to affect the Depth of Field is by adjusting the value of the Aperture
The bigger you set the aperture size (smaller number), the smaller your depth of field will be. The smaller you set the aperture size (bigger number), the bigger the depth of field will be. I know that sounds confusing but hopefully this diagram will help to explain it.
The yellow area shows the area in front of and behind the focal plane (the point when the camera is focused) that is in focus. It’s just a guide with no actual scale.
The Depth of Field is actually also affected by the focal length of the lens, and also the distance of the subject from the camera (which is why there is more in-focus area behind the subject than in front of it), however for the benefit of just getting you started, in this post I’ll only talk about the aperture value.
Aperture Priority mode
The best way to get started with adjusting the Aperture value is to set your camera to Aperture Priority mode. In this mode, you can control the Aperture value and the camera will still adjust the shutter speed and ISO value in order to correctly expose the image.
If you have a camera with a “M / A / S / P” dial on the top, switch it to “A” (for Aperture). If your camera doesn’t have this dial, just change the value on the Aperture ring to anything other than “A” (which in this case stands for Automatic) and set your shutter dial to “A” (Automatic). Your camera is now in Aperture Priority.
How does it affect my images?
Less is more
Using the largest aperture possible (smallest number) allows you to isolate your subject within a shallow depth of field and effectively make the foreground and background far less prominent. These example pictures were shot at f/1.4 using an X-T1 with XF35mm lens. They show foreground and background areas out of focus, allowing you, the viewer, to focus on the subjects.
More is more
Using a smaller aperture (larger number) increases the depth of field and allows you to include more, or all of your image, clear and in focus.
In this image, I wanted to get the tree in the foreground in focus, but still include the background as a prominent part of my image. Using a very wide lens with the Aperture set to f/8.0 allowed me to take this.
Aperture Priority at a glance
1. Activate Aperture-Priority
2. Generally shoot “wide open” – the lowest value Aperture your lens can shoot at. This means that your images will all draw the viewer into the part that you want them to look at – the part in focus.
3. “Stop down” your aperture (increase the value number) to get more of the shot in focus – great for group shots or landscapes / cityscapes
The amount of light captured in a shot is governed by three aspects – Shutter Speed, ISO value and Aperture value. You generally want as fast a shutter speed as possible (unless you are trying to capture motion within your image). You always want the ISO to be as low as possible to maximise the image quality and reduce noise.
However, there is no “you always” rule for Aperture as it is the one thing that affects your final image more than the others. Your decision to include all, or just a certain part of the image within the in-focus area is where you add your own creative touch to your image and direct the viewer’s eyes to the part of the image you want them to look at.
[…] Training your eye to ‘see‘ the best possible shot is probably the most important skill you could hone. The key point here is to imagine the frame of your camera whenever you see something beautiful. Think about all aspects of the shot; where would you stand to take the picture? Where would you position the tree/boat/sun in the frame? What lens would you choose and why? What aperture might you select to impact on the depth of field? […]
Reblogged this on amlbuton and commented:
Tutorial: Understanding Depth of Field
Reblogged this on Oly 35 and commented:
Post muito didático de The Fujifilm Blog!
[…] Acesse o texto original aqui. […]
[…] by Fujifilm UK’s digital camera team, the Fujifilm Blog publishes tutorials (from understanding depth of field to the Rule of Thirds), spotlights on Fujifilm X-Photographers around the world, and guest […]
[…] Click here to learn more about Depth of Field […]
Thanks for the great tutorial.
You must log in to post a comment.