macro

Tips for Handheld Macro Photography

by Fujifilm X Series US September 19, 2016 Comments9

By Nicole S. YoungMacro photography is an fascinating way to get a close-up look at everyday items. Photographers will oftentimes use a tripod to create their photos, but in some cases it is necessary, and also more convenient, to hand-hold the camera to create these images. However with hand-held macro photography you will also face certain challenges along the way. Here are some tips to help get you started creating your own beautiful macro photographs.

Camera gear used in this article:

FUJIFILM X-T1 Camera
FUJIFILM X-T2 Camera
FUJINON XF60mmF2.4 R Macro Lens
Neewer CN-216 Dimmable LED Panel

Add More Light

I like to photograph macro images in the shade or on cloudy days so that I have a nice even light spread across the scene. However, sometimes the existing light is not quite enough for the camera settings required to get a good image (a high shutter speed and lower ISO). To compensate, I will oftentimes use a simple and inexpensive LED light that can either be attached to the hot-shoe of the camera, or held off to the side. This not only adds a good amount of fill light, but it also will help add catchlights to whatever you are photographing.

01_nicolesy_macro_light — **The Neewer CN-216 Dimmable LED Panel adds a nice fill-light to a macro photo without being too harsh.**

Focus Manually

When photographing something that is moving, just like I did with these images of bees, it was very difficult to use auto-focus. The bees were moving to quickly and positioned themselves out of focus before I could even press the shutter. To work around this challenge, I decided to pre-focus the lens and moved the camera back-and-forth until I could see the bee in focus, and then I pressed the shutter and fire off several consecutive frames. You will end up with a lot of throwaway images with this technique, but you will also have a higher chance of getting one of the images from that set in focus.

Here’s a step-by-step on how I performed this technique:

First, I pre-focused the lens so that the focus point was an appropriate distance from the lens for the subject (in this case, a bee on a flower).
Next, I set my drive mode to “continuous high”.
Once I found a good subject (a bee on a flower), I moved the camera back and forth on the bee until I could see it come into focus on the preview on the back of my camera. As I saw it pop into focus, I pressed the shutter and created several images (with the hopes that one of them is in focus).

Focus on the Eyes

If photographing a bug or small animal, it’s important that you focus on the eyes. Small bugs can move around quickly, and so it can be tempting to feel like you are getting a good photo if the creature is facing away from you. While it won’t hurt anything to fire off a few photos (pixel are cheap, after all), a photo of the eyes of a bee, for example, is much more compelling than a bee butt. Have some patience and position yourself so that you can create the best creature portrait as possible.

02_nicolesy_macro_butt — **This photo is in focus, but it’s also the wrong end of the bee! (FUJIFILM X-T2, FUJINON XF60mm Lens, 1/680 sec at F2.4, ISO 400)**

03_nicolesy_macro_eyes — Your best bet is to position yourself so that you can photograph the eyes of your subject. This image shows just how detailed the eyes of a bumblebee can be when zoomed in close. (FUJIFILM X-T1, FUJINON XF60mm Lens, 1/1000 sec at F5, ISO 3200)

Find a Clean Background

Creatively speaking, the composition of your photo is going to be one of the most important aspects. You might have a “technically perfect” photo, but if it does not look good compositionally then it it loses its appeal. I find that one of the easiest ways to get a good composition is to angle myself so that the background is clean and not busy. There are a few different ways you can accomplish this:

Move your camera (or yourself) lower to position the frame at eye-level (instead of shooting down). This will help create a blurred background to separate the subject from its surroundings.
Find a subject that has contrasting elements behind it so that it stands out.
Use a wide aperture to add more blur to the background.

04_nicolesy_macro_composition1 — **The bee in this photo is on a very distracting background, and makes the image less pleasing. (FUJIFILM X-T2, FUJINON XF60mm Lens, 1/420 sec at F2.4, ISO 400)**

To get a better photo, I waited for the bee to move and positioned myself so that the background behind the bee was less busy. (FUJIFILM X-T2, FUJINON XF60mm Lens, 1/320 sec at F2.4, ISO 400)

Use a Fast Shutter Speed

With hand-held photography it’s important to make sure that the shutter speed is set fast enough to prevent camera shake. A good rule of thumb is to set the speed to at least the same number as the focal length of your lens. For example, I was using a XF60mm lens for these photos, so I would want to be sure that the shutter speed was set to no slower than 1/60th of a second to make sure that I don’t add motion blur to the photos. However I also needed to make sure that the shutter speed was fast enough to freeze the action of the bees as they moved around. For these photos I found that a shutter speed of 1/250 (and typically higher) was a safe setting.

06_nicolesy_macro_slow — At 1/30th of a second, the shutter speed is WAY too slow to both hand-hold the bee and photograph it without moving. As a result, there is a significant amount of motion blur in this image. (FUJIFILM X-T2, FUJINON XF60mm Lens, 1/30 sec at F4, ISO 200)

Using a faster shutter speed, such as 1/500th of a second, gives you a better chance of getting a photo without any movement. (FUJIFILM X-T1, FUJINON XF60mm Lens, 1/500 sec at F4, ISO 640)

The intensity of the light in the environment you are photographing will determine if this is going to be an issue. If there is a lot of sunshine or it is very bright (even in a shaded area), then you may be in the clear. However if you do need to increase the shutter speed, here are some tips to help you add more light to the scene:

Try adding an additional light source (similar to what I mentioned at the beginning of the article).
Increase the ISO setting, or set it to “auto” and let the camera decide for you.
Use a wide aperture, such as ƒ/2.8 or wider. Doing this will allow more light to the sensor, but it will also increase the blur and narrow your depth of field (the area that is in focus), so it may be more difficult to get an in-focus photograph.

About the AuthorNicole S. Young is a full-time photography educator living in Portland, Oregon. She owns and operates the Nicolesy Store where she creates and sells photography training, presets, and textures for photographers of all levels. Nicole has also been a stock photographer for over 10 years and licenses her work primarily through Stocksy United.

Filed under Be Inspired Tutorials X-Photographer

The One I’ve Always Wanted

by Fujifilm X Series US August 16, 2016 Comments8

By Bill Fortney

As a Fujifilm X-Photographer and dedicated fan of the Fujifilm X Series System, I had a feeling that something new was coming! The X-T1 was a terrific camera, one that has served me very well for the past few years, but when I experienced an early prototype of the X-Pro2, I started wishing and praying the X-T2 would have those fantastic improvements if and when it arrived.For just a minute, let’s pretend (I love to pretend, so let’s pretend) that Fujifilm called me and said, “Bill, what would you like to have in the new X-T2?” Well, when I got the chance to shoot an early prototype of the X-T2, I realized just how innovative and talented those folks at Fujifilm really are: it’s as if the X Series engineers could read my mind! Fujifilm doesn’t make life very easy for us, choosing between the already incredible X-Pro2 and the now newly released X-T2. The new X-T2 is the perfect option for people like me that do a number of different kinds of photography: nature/landscape, wildlife, travel, close-ups and Americana. The newly developed viewfinder in the X-T2 is the best electronic viewfinder of any Fujifilm camera so far – and that’s saying a lot! With increased magnification and resolution, the X-T2 is a pleasure to see the world through – and with that viewfinder, it’s a beautiful world.One of the new features that is especially valuable for capturing a variety of moods in landscape photography is the new ACROS Black and White film simulation. I shoot in jpeg file mode and shoot Velvia, Provia and Acros as my three film simulations. When studying a landscape’s potential, I need the three options for capturing the best scene in the most effective way. The X-T2 is wonderful in how easy it makes it for me to do just that: this camera is the perfect instrument for all landscape photographers.The newly developed X-Trans CMOS III sensor gives a great boost in resolution with its 24.3 megapixels. It has gorgeous gradation and maintains superb low noise performance as the previous X-T1 sensor, actually even around a stop better.Another sheer joy on the X-T2 is the placement and action of the buttons and dials, all making the use of the camera sleekly enhanced. The new joystick is a great improvement for moving the focus points and one improvement I can’t live without now that I’ve experienced it.Hey, all this is wonderful but the bottom line for any camera is the image quality and the new X-T2 delivers in spades. Team the new X-T2 with those incredible FUJINON XF lenses and the results are simply amazing. Once again, Fujifilm has delivered up a fantastic tool for us to go out into this beautiful world and capture it all.

Filed under Be Inspired Landscape / Cityscape / Seascape Macro Travel X-Photographer

Backyard Bokeh: Find Everyday Inspiration!

by Fujifilm X Series US May 26, 2016 Comments3

By Seth K. Hughes

As someone who has traveled 50,000 miles in the past couple of years, I’ve come to realize you don’t have to go far to have fun and make great photos. Truth is, no matter where you live, all you have to do is step outside your back door. I guarantee that if you slow down and look closely at what’s around you, you’ll find many interesting subjects. Whether it’s literally in your backyard, in the nearest park, or an adorable pet —these things are right there under your nose just waiting to be noticed.While visiting Louisiana, I headed out with my weather-resistant FUJIFILM X-Pro2. Within just a few yards I found leaves, flowers, insects, frogs, and my beloved pooch Emma. Admittedly, I wasn’t feeling very inspired in the beginning. At first glance, there was nothing particularly interesting about my environment. I walked out my door, down a paved road and stumbled upon a nondescript nature path. I had to force myself to slow down and peer into places I would otherwise have overlooked. By the end of the shoot, I was having a blast.I recommend keeping it simple and just grabbing your camera and one or two lenses (tripod optional).I chose my FUJINON XF56mmF1.2 R APD prime lens known for its sharpness, clarity and beautiful bokeh effects. The FUJINON lens lineup pairs perfectly with – and optimizes – the X Series camera system. This APD prime is the only lens I’ve ever used that ships with its own apodization filter (think ND filter) which creates smooth bokeh outlines and enhances the three dimensional feel of an image. To maximize the bokeh capabilities and create a macro-lens aesthetic, I opened the lens up all the way to f/1.2 and manually set the focus to its closest distance. Then I just explored and moved the camera in and out on various objects. When I found something I liked, I framed up an interesting composition and further refined the focal point.

**Lighting tip: look for subjects in the open shade or go out on an overcast day. This will ensure your light is soft, your colors are enhanced and your exposure values are under control.The other lens was the venerable XF50-140mmF2.8 R LM OIS WR which is one of the best lenses available today for image quality and stabilization. I find this lens to be excellent all around and I’ve always enjoyed shooting portraits in this focal range. Enter my beloved brindle boxer — Emma. She emerged in a bed of flowers and I instantly had a muse!I found close to a dozen pictures in under an hour while I was just meandering around. It really pays to take your time (and your camera) and absorb whichever features happen to be around you. You will see the beauty and details in everyday life. I guarantee you’ll find something interesting.

Filed under Macro Photography Tutorials X-Photographer

Get creative with a window lightbox

by Roger Payne May 3, 2016 Comments4

Written by Roger Payne

After my bathtub antics last time round – you can read that here if you missed it – I’d got the taste for creating studio quality results on the cheap. I spotted my chance when my wife bought some colourful tulips into the house and within seconds of them being put in a vase, I snaffled them to get shooting.

Aside from the flowers themselves, I used two sheets of white A3 paper, which I taped to a north-facing window. I used two sheets as a single sheet tends to show the pulp in the paper when lit from behind and then put a couple of paper clips on the bottom just to hold the sheets together and add a little weight. A couple of bulldog clips would be just as effective. With my X-E2S mounted to a tripod with the XF60mm macro lens attached, I started my shoot by selecting a custom white-balance setting; effectively to tell the camera the white point in my set-up to guarantee accurate colour reproduction. This was done by choosing White Balance in the menu, then one of the custom options before following the simple on-screen instructions. With that done, the flowers were placed in front of the paper and I got this.

It’s hardly inspiring, is it? Composition aside, the biggest problem is the fact that the white paper has gone grey. This is because metering systems are calibrated to 18% grey. This is not a problem when shooting most standard scenes, but when you have white (or black) subjects they need a helping hand. I tried two options. First, I switched to spot metering and took a reading from the shadow area of the central yellow bloom. The result was better, but was starting to bleach the highlights, so I dialed in +1.3 stops of exposure compensation instead. Better.

The fact remained that the collection of tulips weren’t really working together, so I started trying individual flowers, placed in a toothbrush holder and held in place with a piece of scrunched up paper – no expense spared! I moved the focusing point to the flower head and tried a range of framing options.

If you’ve ever used the XF60mm Macro, you’ll know that it’s optically superb, and as the lens focused I found myself liking the abstract-like shapes in the out-of-focus bloom areas. So I switched to manual focusing, deliberately defocused and then took a range of images varying the aperture from F2.4 to F11, which altered the amount that was sharp. This one at F3.6 suited me best.

I swapped to another flower and did the same, shooting some in sharp focus and some defocused. This was repeated on the third bloom with which I also tried a few Film Simulation modes, including basic Black & White and Classic Chrome.

Shooting done, when I came to edit the images, I really liked the defocused shots and thought they could create a piece of abstract art if I created a triptych, which was easy enough to do in Photoshop. I simply created a black background, then dropped the images on in turn before shuffling them around until I got the position right.

What do you think? I rather like the look. My wife, however, was a little less impressed. Turns out tulips don’t like being man-handled a great deal and the ones I’d photographed individually soon wilted.

Back to the shops for me!

Filed under Be Inspired Macro Photography Tutorials

Big tips for shooting small

by Roger Payne February 17, 2016 Comments4

What’s not to like about macro (close up) photography? Getting closer to your subjects to see them in greater detail will always appeal, so picking up a few techniques to help you get better at shooting close ups is always worthwhile. Before we get down to the picture taking, let’s cover off the basics.

First, to get the best results you’re going to need a macro lens. That doesn’t mean a lens that has a macro setting, it means a proper macro lens. Such optics aren’t only suitable for close up work. The FUJIFILM XF60mm F2.4 Macro lens that we’re using here, for example, doubles as an excellent lens for shooting portraits, but it’s optically engineered to excel at close ups.

When it comes to macro lenses you’ll often hear the term ‘reproduction ratio’, such as 1:2 or lifesize. Put simply, this refers to the size the lens can reproduce what it’s being pointed at. A macro lens that offers a lifesize (or 1:1) ratio will reproduce the subject at the same size on the sensor as it is in real life. 1:2 means the subject will be reproduced at half lifesize, and so on. The XF60mm offers a 1:2 reproduction ratio.

Finally for now, it’s important to know that the closer you get to a subject, the smaller the area that appears in sharp focus. Given this, focusing has to be extremely precise, which is why a tripod or some other form of support is recommended.

Scenario 1: Shooting macro outdoors

With spring just around the corner, it’s obvious to brush up on your macro skills so you can shoot flowers. Indeed, for this very blog, I found a clump of snowdrops in my local park. Shooting macro images outdoors brings a number of challenges. The light levels vary which can cause exposure issues and, on the day I shot, it was windy, which causes delicate flowers like this to blow around a lot. That means you’ll need to shoot plenty of images, so make sure your battery is fully charged and you there’s plenty of room on your memory card.

I used an X-T1 for all these images as the fold out LCD is an absolute godsend. As I was working at ground level, it avoided me having to lay down on the cold ground. Instead, I popped out the LCD and rested the camera on a rolled up coat for support as my tripod didn’t go low enough.

I picked my subject carefully, finding one bloom that was isolated away from a larger group so I could focus attention on it and still get some complementary colours in the background; always check what is behind your subject before you shoot.

The first shot I took (above) was with the XF18-55mm set to 55mm and at its closest focusing distance. To be fair, this isn’t a bad result at all, but doesn’t really have a huge amount of impact as the bloom is quite small. So I reached for the macro lens and took this:

It’s a big improvement with the bloom occupying more of the frame, but the light is a little flat, so I used a small silver reflector placed under the snowdrop to push some more light in and get an even better shot:

I could have stopped there and been happy, but I also had the FUJIFILM MCEX-11 and MCEX-16 extension tubes with me, so I gave them a try. The tubes fit between the lens and body and allow you to focus even closer. Both tubes maintain all functionality between lens and camera including autofocus, but the focus can hunt a little more and as I was getting so close to the snowdrop I opted to switch to manual focus and use Focus Assist to enlarge the subject on the X-T1’s rear LCD for focusing accuracy. AF hunting isn’t the end of the world, but means you can end up with shots like this where it’s focused on the background rather than the single bloom.

I took three further sets of images, one with the 11mm, one with the 16mm and then one with the two combined, which got me closest of all. The reflector stayed in place for each image, but the sun was in and out hence the variations in light levels. Take your pick!

Scenario 2: Focus stacking indoors

Time to warm up and head indoors to try another macro technique: focus stacking. Here, you take a range of shots with the lens focused on different parts of the subject before using Photoshop to stack them all together and get one super sharp image.

As previously mentioned, the closer you get to the subject, the smaller the zone of sharp focus so it can be difficult to get the image sharp from front to back. One solution would be to put the camera on a tripod and use a small aperture. But this could make for a long exposure, plus lenses aren’t always at their optical best at smaller apertures. It’s better to pick a central aperture – here I used F5.6 – and stack the images together.

To make this technique work, you’ll need something called a focusing rail. This attaches to your camera and allows you to make precise incremental changes by using the measure on the side of the rail. I used the 454 Micropositioning Sliding Plate by Manfrotto. I attached this to the X-Pro2 and XF60mm with MCEX-11 extension tube I was using inside, then put both on a tripod and framed up my subject – a dusty snooker scoreboard. In case you wondering why I didn’t remove the dust, this is purely to show how much detail you can get using the stacking technique.

With the XF60mm set at F5.6 and manually focused on the number 9, here’s the result I got (above). The 9 is nice and sharp, but the in focus area soon drops off on either side. Next, I didn’t touch the focus on lens and moved the focusing rail until the point nearest the camera came into focus. Noting the distance on the rail, I took a shot. I then moved the rail until the furthest point from the camera into focus and took another shot. Again, nothing on the camera was changed and I noted the distance on the rail.

The distance between the two focus points needed the rail to be moved by 4cm. So, again, by not touching any settings on the camera or lens, I moved the rail incrementally by 2mm at a time and took further shots. This gave me a total of around 20 images. Shooting over, I went to my computer and fired up Photoshop.

I opened all the files at once in Photoshop and then chose File>Scripts>Load File into Stack then on the dialogue box that opened, I chose Add Open Files and OK. With this complete, I then opened the Layers palette in the resulting image and selected all the Layers before choosing Edit>Auto-Align Layers. Once this was complete, I then selected all the Layers again and chose Edit>Auto-Blend Layers. On the resulting dialogue box, I chose Stack Images and then hit OK.

Depending on how much RAM your computer has, these processes may take a while, but once Photoshop has weaved its magic, you should find a sharp image where all the frames are stacked together. There is a possibility that your image will have some odd overlapping elements caused by the slight variance in camera angle between each frame as you move the camera along the rail. In this case, I did, but I was able to crop in slightly to removing the offending areas. If that’s not an option, you’ll need to try a different subject matter and preferably shoot on a plain background such as white or black.

If you’re happy with the result, finish by choosing Layer>Flatten Image and you’re done!

So there you have it – macro in a nutshell. One final point to bear in mind, macro photography is time-consuming to get right. Don’t expect great results straightaway, although there’s little doubt that patience will be rewarded. So when it comes to macro ideas, think big!

Filed under Macro Photography Tutorials

Natural vs artificial light

by Roger Payne December 3, 2015 Comments5

Light. There’s a lot of it about. And as photographers it’s up to us to harness it in every shot we take.

You may have a personal preference as to which light source you prefer, be it natural or artificial and, despite the combative title of this blog, we’re not for one minute going to suggest that one is better than the other. Instead, we’d suggest that it’s what you’re shooting that counts and should make your choice accordingly.

By way of demonstration, I set up a couple of still-life images, lighting one using artificial light from a humble desk lamp and the other using diffused daylight on a cloudy day. Along with the lighting being switched, I also changed the subject, but nothing else – the background is the same as is the kit – a tripod-mounted X-T1 with the spectacular XF90mm F2.

Shooting in artificial light

The beauty of artificial light is that it’s completely controllable. Even a simple desk lamp, like the one I’ve used here, can easily be moved around so you can direct the light where you want it. The same, of course, applies to flash, LED and fluorescent light sources. Compared to daylight, artificial light sources are comparatively small, meaning the light they emit is more harsh. You can diffuse it or you could simply play to these strengths, as I did here to light my spanner collection. Metallic objects – among others – are great for this kind of light, which throws deep shadows on the opposite side to the light source. For the collection of images below, I simply moved the light around the set up to get a variety of different effects.

As well as being a harsher light source, artificial light like my desk lamp tends to be less powerful, so you may need to increase your ISO if you want to shoot hand-held or – as I did here – mount the camera on a tripod. You also need to consider your white balance settings, but we’ll come to that a bit later.

Shooting in daylight

Putting my desk lamp to one side for a minute, I moved on to shooting with daylight, using a large, north-facing window in my house as the light source and opening the curtains completely. North-facing windows are best because no matter what time of day you shoot, the light will always be soft as the sun will never shine directly through it. I had no such problems on this dreary day. Daylight like this is lovely and soft, so it lends itself perfectly to flattering portraiture. With no willing human subjects on hand, I switched to this gerbera, which benefits just as well from the diffused light.

I started by setting up with the window directly behind me, which created the shot above. It’s OK, but the light is very flat and the background is a little more prominent than I would have liked. To solve this, I moved the flower round by 90° to help create some shadows between the petals and tried again. Much nicer – there’s some improved definition on the stem of the flower and the background is darker!

The daylight was a little brighter than my artificial light set up, but not by a huge margin and, wanting to keep the ISO down, I shot tripod-mounted again. With a human subject, I’d have pushed the ISO higher. Despite the fact that I was shooting within one metre of a floor-to-ceiling window, daylight levels do drop off quickly as you move away from the window. To counteract this, I used an A2 sheet of white card as a reflector to push light into the left hand side of the flower.

A question of white balance

Every light source has its own colour temperature, which is measured in Kelvin, essentially this means that different types of light have different colours. The human eye automatically corrects for this, but cameras can’t so you need to make sure you set the correct white balance setting to make sure colours are accurate under different lighting conditions. It’s tempting to shoot with white balance on Auto, but this one size fits all approach can get caught out. Which is why I always change the white balance setting myself when I shoot. Shooting in Raw is also an option as you can change the white balance setting in post production; a luxury that isn’t available with JPEGs.

Your X series camera comes with a variety of preset white balance options – daylight, incandescent, shady, fluorescent etc – in the first instance, use one of these. But the X-series cameras also have a Custom white-balance option which helps you get super-accurate colours 100% of the time.

Using it is simple, just frame the shot as you want it, select the Custom white-balance mode and then follow the on-screen instructions. Essentially, you need to hold a piece of white paper or card in the same lighting as the subject and then let the camera do the rest. I did that on both set ups, as well as used some presets, the results of which are shown here. Of course, there’s no right or wrong here, you can simply pick the shot you like the best, but it’s well worth playing about with white balance settings. Give it a go, whatever lighting you’re using!

For more help with white balance & settings please find our dedicated tutorial here.

Filed under Macro Tutorials

Archives